. . . while I was at Neils, we tested my motors on 12v. As before I think they were too slow. So we tried again with one of Neils many battery drill batteries. 14.5v made it whizz around in fine style so I think over-volting them to 18v should be adequate. 24v may be a bit too much.
-
- 18 Aug. 2007 @ 11:05:31 am
-
- 18 Aug. 2007 @ 11:10:39 am
also what are the overall dimensions of the motors
thanks
matthew-
-
Pureteenlard
- 18 Aug. 2007 @ 09:05:55 pm
Overall dimensions are;
Motors: 76mm diameter by 100mm (3" x 4")
Gearbox: across the diameter, 130mm (5" ish)and 45mm deep. -
-
-
Pureteenlard
- 18 Aug. 2007 @ 09:02:51 pm
At twelve volts the speed is . . . too slow in my opinion. With an 11" wheel it does about 5mph with a laden golf trolley. If you use a 6" drive sprocket it will travel at, roughly, 2.5 - 3mph. Too slow, I think.
-
- 19 Aug. 2007 @ 09:07:27 am
thanks for that i may get some for my tank
matthew
-
-
- http://www.halffry.com
- 24 Mar. 2009 @ 10:49:29 am
make money
http://www.halffry.com/make-pc-atm.html
hi, do you know what the speed of the motors you have is at 12v as i like the look of the motors in the ebay shop and was wondering about the speed and gear ratios
matthew